*** MIDAS logfile (05SEPpl1.2) *** We, 11 Apr 2007 13:25:54 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** We, 11 Apr 2007 13:26:08 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 070411 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 298.65 stddev = 1.85 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_070411 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.55 1703.3 1703.6 836.2 0.14 0.03 2.04 2 1.09 3396.0 3398.8 1609.2 -0.16 -0.17 2.11 3 2.17 6812.9 6813.8 3210.9 0.06 0.06 2.12 4 3.25 10204.7 10203.2 5107.0 -0.09 -0.10 2.00 5 4.88 15321.9 15323.4 7497.6 0.00 0.02 2.04 6 6.50 20416.8 20413.8 10376.2 -0.08 -0.07 1.97 7 8.13 25543.0 25543.0 13124.0 0.01 0.03 1.95 8 10.84 34050.7 34050.4 16795.7 -0.01 0.02 2.03 9 13.55 42582.6 42587.3 21241.9 0.04 0.07 2.00 10 16.25 51125.3 51130.0 24836.6 0.09 0.12 2.06 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3457 to 103762 e- Average count rate measured: 3143 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.03 +/- 0.02 e-/ADU RON = 3.75 +/- 0.04 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.004 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.13/-0.17 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay