*** MIDAS logfile (05SEPpl1.2) *** Sa, 31 Mar 2007 14:47:50 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** Sa, 31 Mar 2007 14:48:04 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 070331 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 298.81 stddev = 1.84 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_070331 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.55 1714.3 1711.3 812.8 0.14 0.04 2.11 2 1.09 3412.7 3408.5 1647.8 -0.19 -0.26 2.07 3 2.17 6842.7 6845.0 3324.3 0.06 0.09 2.06 4 3.25 10245.6 10245.6 4947.3 -0.11 -0.09 2.07 5 4.88 15385.1 15386.0 7803.5 0.00 0.03 1.97 6 6.50 20499.2 20501.3 9946.3 -0.08 -0.06 2.06 7 8.13 25652.2 25648.9 12910.6 0.03 0.04 1.99 8 10.84 34189.8 34186.1 17064.1 -0.00 0.01 2.00 9 13.55 42767.5 42767.8 22003.7 0.07 0.09 1.94 10 16.25 51323.7 51329.2 25474.1 0.08 0.11 2.01 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3393 to 101687 e- Average count rate measured: 3155 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.98 +/- 0.02 e-/ADU RON = 3.64 +/- 0.04 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.003 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.12/-0.22 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay