*** MIDAS logfile (05SEPpl1.2) *** Sa, 24 Mar 2007   16:13:33   Page 1
 
 
*** MIDAS logfile (vers. 05SEPpl1.2) *** Sa, 24 Mar 2007   16:13:47   Page 2
 
     ==========================================================
     SUMMARY STANDARD TEST CCD#45 TAKEN ON 070324 IN fastcd MODE
     ==========================================================
 
      BIAS
      ====
 
      5 biases at start test: average = 297.73 stddev =   1.85 
               FIERA temperature = 273.15 K                   
      There were 0 hot pixels/columns detected
 
 
      TRANSFER FUNCTION AND LINEARITY DATA
      ====================================
 
  Table : Std_fastcd_45_070324 
 Sequence Exp_tim1  Med_cnt1  Med_cnt2  Variance  Frc_cnt1  Frc_cnt2  el_adu1  
 -------- --------- --------- --------- --------- --------- --------- ---------
        1      0.55    1709.8    1712.2     814.8      0.06      0.10      2.10
        2      1.09    3413.8    3413.5    1605.1     -0.13     -0.15      2.13
        3      2.17    6847.7    6848.1    3315.4      0.08      0.09      2.07
        4      3.25   10250.7   10250.0    5166.6     -0.11     -0.11      1.98
        5      4.88   15394.7   15394.8    7560.1      0.01      0.01      2.04
        6      6.50   20508.5   20512.4   10183.5     -0.09     -0.08      2.01
        7      8.13   25669.8   25667.8   13090.5      0.03      0.03      1.96
        8     10.84   34205.0   34208.5   17335.2     -0.02     -0.01      1.97
        9     13.55   42810.2   42796.5   21374.9      0.10      0.06      2.00
       10     16.25   51355.9   51356.3   25864.7      0.07      0.07      1.99
 -------- --------- --------- --------- --------- --------- --------- ---------
 
      Dynamic range explored: from 3386 to 101645 e-
      Average count rate measured: 3158 ADU/sec.
 
      CONV. FACTOR AND RON
      ====================
 
      C.Fact =   1.98 +/-   0.01 e-/ADU
 
      RON    =   3.67 +/-   0.02 e- RMS
 
 
      SHUTTER ERROR
      =============
 
 Average shutter error derived from fractional count rate = -0.004 sec
 
 
      LINEARITY ERROR
      ===============
 
 Average linearity error after shutter correct. = + 0.10/-0.14 %
 
 These errors represent maximum deviation in % from the average
 count rate after correction for shutter delay