*** MIDAS logfile (05SEPpl1.2) *** Mo, 19 Mar 2007 13:04:12 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** Mo, 19 Mar 2007 13:04:26 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 070319 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 298.36 stddev = 1.90 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_070319 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.55 1708.9 1706.0 808.4 0.08 0.15 2.11 2 1.09 3400.2 3399.5 1620.0 -0.23 -0.18 2.10 3 2.17 6824.9 6822.8 3404.7 0.06 0.07 2.00 4 3.25 10217.9 10218.0 5127.4 -0.10 -0.10 1.99 5 4.88 15347.9 15343.3 7808.9 0.04 0.00 1.97 6 6.50 20445.3 20442.2 10116.1 -0.07 -0.09 2.02 7 8.13 25584.1 25582.6 12628.5 0.04 0.02 2.03 8 10.84 34095.3 34095.4 17163.2 0.00 -0.01 1.99 9 13.55 42648.2 42643.4 21161.7 0.07 0.04 2.02 10 16.25 51194.7 51196.8 25094.6 0.11 0.09 2.04 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3458 to 103692 e- Average count rate measured: 3147 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.03 +/- 0.01 e-/ADU RON = 3.85 +/- 0.02 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.004 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.13/-0.21 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay