*** MIDAS logfile (05SEPpl1.2) *** Mo, 05 Mar 2007 15:41:14 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** Mo, 05 Mar 2007 15:41:28 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 070305 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 297.94 stddev = 1.86 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_070305 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.55 1694.4 1692.6 804.0 0.10 0.10 2.11 2 1.09 3375.2 3376.1 1604.3 -0.23 -0.20 2.10 3 2.17 6773.5 6775.6 3269.0 0.06 0.08 2.07 4 3.25 10143.5 10142.9 4908.1 -0.11 -0.11 2.07 5 4.88 15234.7 15233.3 7359.2 0.02 0.01 2.07 6 6.50 20299.7 20292.6 10245.9 -0.07 -0.09 1.98 7 8.13 25402.1 25399.2 12622.7 0.04 0.04 2.01 8 10.84 33854.4 33850.3 16784.4 0.00 -0.00 2.02 9 13.55 42358.2 42348.1 21184.4 0.09 0.08 2.00 10 16.25 50823.2 50823.0 25386.9 0.09 0.09 2.00 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3375 to 101296 e- Average count rate measured: 3125 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.99 +/- 0.01 e-/ADU RON = 3.71 +/- 0.01 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.004 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.10/-0.22 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay