*** MIDAS logfile (05SEPpl1.2) *** Fr, 16 Feb 2007   15:51:22   Page 1
 
 
*** MIDAS logfile (vers. 05SEPpl1.2) *** Fr, 16 Feb 2007   15:51:36   Page 2
 
     ==========================================================
     SUMMARY STANDARD TEST CCD#45 TAKEN ON 070216 IN fastcd MODE
     ==========================================================
 
      BIAS
      ====
 
      5 biases at start test: average = 298.18 stddev =   1.90 
               FIERA temperature = 273.15 K                   
      There were 0 hot pixels/columns detected
 
 
      TRANSFER FUNCTION AND LINEARITY DATA
      ====================================
 
  Table : Std_fastcd_45_070216 
 Sequence Exp_tim1  Med_cnt1  Med_cnt2  Variance  Frc_cnt1  Frc_cnt2  el_adu1  
 -------- --------- --------- --------- --------- --------- --------- ---------
        1      0.55    1718.9    1721.5     841.7      0.13      0.05      2.04
        2      1.09    3420.3    3423.9    1638.9     -0.27     -0.27      2.09
        3      2.17    6875.5    6871.6    3399.3      0.17      0.11      2.02
        4      3.25   10281.2   10279.8    4937.7     -0.12     -0.13      2.08
        5      4.88   15435.8   15435.7    7557.8     -0.02     -0.01      2.04
        6      6.50   20571.1   20569.1   10141.0     -0.08     -0.08      2.03
        7      8.13   25730.1   25731.5   12536.7     -0.02      0.01      2.05
        8     10.84   34303.8   34307.1   17441.3     -0.02      0.01      1.97
        9     13.55   42952.5   42956.0   21641.6      0.15      0.18      1.98
       10     16.25   51510.1   51515.2   25716.4      0.09      0.12      2.00
 -------- --------- --------- --------- --------- --------- --------- ---------
 
      Dynamic range explored: from 3414 to 102242 e-
      Average count rate measured: 3166 ADU/sec.
 
      CONV. FACTOR AND RON
      ====================
 
      C.Fact =   1.98 +/-   0.01 e-/ADU
 
      RON    =   3.77 +/-   0.03 e- RMS
 
 
      SHUTTER ERROR
      =============
 
 Average shutter error derived from fractional count rate = -0.003 sec
 
 
      LINEARITY ERROR
      ===============
 
 Average linearity error after shutter correct. = + 0.18/-0.27 %
 
 These errors represent maximum deviation in % from the average
 count rate after correction for shutter delay