*** MIDAS logfile (05SEPpl1.2) *** Tu, 13 Feb 2007 12:40:47 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** Tu, 13 Feb 2007 12:41:01 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 070213 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 297.70 stddev = 1.87 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_070213 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.55 1719.8 1722.7 821.5 0.02 0.10 2.09 2 1.09 3430.5 3430.8 1674.3 -0.17 -0.18 2.05 3 2.17 6877.6 6876.7 3378.5 0.05 0.04 2.04 4 3.25 10300.6 10300.2 5078.4 -0.09 -0.09 2.03 5 4.88 15467.1 15466.0 7792.8 0.02 0.01 1.98 6 6.50 20609.0 20608.7 10433.1 -0.06 -0.06 1.98 7 8.13 25785.5 25783.5 12965.3 0.04 0.03 1.99 8 10.84 34368.7 34367.3 17406.4 0.01 0.00 1.97 9 13.55 42985.2 42983.8 20975.7 0.06 0.06 2.05 10 16.25 51601.0 51603.7 25295.8 0.11 0.11 2.04 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3497 to 104833 e- Average count rate measured: 3172 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.03 +/- 0.02 e-/ADU RON = 3.80 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.003 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.11/-0.18 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay