*** MIDAS logfile (05SEPpl1.2) *** Th, 25 Jan 2007 13:58:24 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** Th, 25 Jan 2007 13:58:38 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 070125 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 297.62 stddev = 1.86 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_070125 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.55 1725.6 1723.6 820.8 0.05 0.16 2.10 2 1.09 3438.3 3438.1 1643.7 -0.17 -0.15 2.09 3 2.17 6892.9 6894.3 3211.4 0.03 0.06 2.15 4 3.25 10324.5 10322.4 4979.8 -0.09 -0.12 2.07 5 4.88 15500.3 15502.2 7816.9 0.01 -0.00 1.98 6 6.50 20655.7 20658.4 10262.4 -0.06 -0.08 2.01 7 8.13 25842.9 25844.1 12800.2 0.03 0.01 2.02 8 10.84 34452.1 34456.4 17309.5 0.02 0.00 1.99 9 13.55 43076.0 43083.8 21653.3 0.05 0.03 1.99 10 16.25 51727.2 51728.9 25715.9 0.12 0.09 2.01 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3434 to 103012 e- Average count rate measured: 3180 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.99 +/- 0.01 e-/ADU RON = 3.70 +/- 0.02 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.004 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.14/-0.16 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay