*** MIDAS logfile (05SEPpl1.2) *** Su, 07 Jan 2007 15:02:50 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** Su, 07 Jan 2007 15:03:04 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 070107 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 298.40 stddev = 1.87 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_070107 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.55 1726.0 1723.7 811.5 0.11 0.03 2.13 2 1.09 3441.9 3441.9 1630.6 -0.14 -0.14 2.11 3 2.17 6903.9 6902.2 3402.6 0.08 0.08 2.03 4 3.25 10336.9 10337.1 5121.8 -0.09 -0.09 2.02 5 4.88 15523.2 15522.4 7634.7 0.02 0.02 2.03 6 6.50 20681.1 20682.7 10507.0 -0.07 -0.07 1.97 7 8.13 25877.5 25875.7 12618.9 0.02 0.02 2.05 8 10.84 34493.4 34494.4 17240.0 -0.00 0.00 2.00 9 13.55 43109.8 43136.9 21968.7 -0.02 0.04 1.96 10 16.25 51788.4 51792.6 25552.9 0.09 0.10 2.03 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3446 to 103473 e- Average count rate measured: 3184 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.00 +/- 0.02 e-/ADU RON = 3.73 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.004 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.10/-0.14 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay