*** MIDAS logfile (05SEPpl1.2) *** Tu, 02 Jan 2007 11:42:42 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** Tu, 02 Jan 2007 11:42:56 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 070102 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 297.59 stddev = 1.86 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_070102 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.55 1727.2 1724.7 823.3 0.10 0.03 2.10 2 1.09 3436.9 3438.5 1651.6 -0.23 -0.20 2.08 3 2.17 6895.4 6894.8 3344.4 0.03 0.03 2.06 4 3.25 10330.2 10329.7 5063.4 -0.08 -0.08 2.04 5 4.88 15510.0 15509.5 7815.5 0.02 0.02 1.98 6 6.50 20667.3 20665.8 10251.9 -0.06 -0.06 2.02 7 8.13 25852.8 25857.1 13096.2 0.02 0.04 1.97 8 10.84 34470.3 34470.0 16901.9 0.03 0.03 2.04 9 13.55 43096.6 43097.6 21682.7 0.04 0.05 1.99 10 16.25 51753.5 51755.1 25504.1 0.12 0.13 2.03 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3472 to 104113 e- Average count rate measured: 3181 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.01 +/- 0.01 e-/ADU RON = 3.75 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.003 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.13/-0.21 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay