*** MIDAS logfile (05SEPpl1.2) *** We, 06 Dec 2006 14:43:01 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** We, 06 Dec 2006 14:43:15 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 061206 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 297.68 stddev = 1.87 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_061206 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.55 1711.2 1711.4 827.8 0.08 0.09 2.07 2 1.09 3406.8 3407.7 1672.6 -0.22 -0.20 2.04 3 2.17 6834.6 6832.3 3275.2 0.06 0.04 2.09 4 3.25 10233.5 10231.5 5027.7 -0.09 -0.11 2.04 5 4.88 15366.8 15366.9 7821.8 0.02 0.02 1.96 6 6.50 20476.5 20474.4 10143.6 -0.06 -0.07 2.02 7 8.13 25617.3 25615.8 12639.7 0.03 0.03 2.03 8 10.84 34146.5 34149.7 17244.4 0.01 0.02 1.98 9 13.55 42703.4 42703.1 21139.2 0.06 0.06 2.02 10 16.25 51274.9 51273.0 24925.0 0.12 0.12 2.06 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3479 to 104239 e- Average count rate measured: 3151 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.03 +/- 0.02 e-/ADU RON = 3.80 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.003 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.12/-0.21 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay