*** MIDAS logfile (05SEPpl1.2) *** We, 15 Nov 2006 13:51:36 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** We, 15 Nov 2006 13:51:50 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 061115 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 297.48 stddev = 1.92 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_061115 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.55 1720.0 1717.6 820.0 0.11 0.03 2.10 2 1.09 3423.7 3423.6 1604.9 -0.24 -0.23 2.13 3 2.17 6867.4 6870.1 3321.5 0.05 0.08 2.07 4 3.25 10283.3 10283.3 4941.0 -0.11 -0.10 2.08 5 4.88 15447.0 15442.7 7405.6 0.04 0.02 2.09 6 6.50 20573.2 20575.2 9987.1 -0.08 -0.07 2.06 7 8.13 25748.9 25751.5 13071.9 0.05 0.06 1.97 8 10.84 34315.6 34315.4 17228.3 0.00 0.01 1.99 9 13.55 42926.2 42924.6 21512.9 0.08 0.08 2.00 10 16.25 51519.2 51520.3 26365.8 0.09 0.11 1.95 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3362 to 100764 e- Average count rate measured: 3167 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.96 +/- 0.02 e-/ADU RON = 3.75 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.003 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.11/-0.24 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay