*** MIDAS logfile (05SEPpl1.2) *** Sa, 04 Nov 2006 12:13:14 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** Sa, 04 Nov 2006 12:13:28 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 061104 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 298.02 stddev = 1.89 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_061104 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.55 1716.4 1715.3 813.9 0.11 0.04 2.11 2 1.09 3415.0 3417.4 1609.8 -0.22 -0.18 2.12 3 2.17 6853.3 6854.5 3355.8 0.06 0.08 2.04 4 3.25 10259.2 10260.8 5074.5 -0.11 -0.10 2.02 5 4.88 15406.7 15409.4 7488.7 0.01 0.02 2.06 6 6.50 20530.2 20527.8 10215.3 -0.07 -0.07 2.01 7 8.13 25687.8 25687.4 12404.1 0.04 0.03 2.07 8 10.84 34237.8 34237.4 17186.8 0.01 0.01 1.99 9 13.55 42824.2 42825.0 21714.2 0.07 0.07 1.97 10 16.25 51401.5 51401.7 25550.3 0.10 0.10 2.01 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3415 to 102301 e- Average count rate measured: 3160 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.99 +/- 0.02 e-/ADU RON = 3.76 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.003 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.10/-0.20 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay