*** MIDAS logfile (05SEPpl1.2) *** We, 25 Oct 2006 14:59:45 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** We, 25 Oct 2006 14:59:59 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 061025 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 297.92 stddev = 1.87 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_061025 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.55 1721.1 1717.5 861.4 0.14 0.06 2.00 2 1.09 3425.5 3421.9 1622.8 -0.20 -0.26 2.11 3 2.17 6869.1 6870.2 3279.0 0.05 0.07 2.09 4 3.25 10284.2 10283.0 4997.6 -0.13 -0.11 2.06 5 4.88 15446.9 15447.1 7506.2 0.01 0.03 2.06 6 6.50 20582.4 20581.5 10317.3 -0.07 -0.06 1.99 7 8.13 25755.2 25751.6 12559.9 0.04 0.05 2.05 8 10.84 34324.3 34322.1 16990.6 0.00 0.01 2.02 9 13.55 42934.0 42936.3 21670.4 0.07 0.09 1.98 10 16.25 51527.6 51528.3 25717.9 0.08 0.10 2.00 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3423 to 102590 e- Average count rate measured: 3168 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.99 +/- 0.01 e-/ADU RON = 3.72 +/- 0.02 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.003 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.12/-0.23 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay