*** MIDAS logfile (05SEPpl1.2) *** Fr, 13 Oct 2006   16:44:46   Page 1
 
 
*** MIDAS logfile (vers. 05SEPpl1.2) *** Fr, 13 Oct 2006   16:45:00   Page 2
 
     ==========================================================
     SUMMARY STANDARD TEST CCD#45 TAKEN ON 061013 IN fastcd MODE
     ==========================================================
 
      BIAS
      ====
 
      5 biases at start test: average = 298.11 stddev =   1.85 
               FIERA temperature = 273.15 K                   
      There were 0 hot pixels/columns detected
 
 
      TRANSFER FUNCTION AND LINEARITY DATA
      ====================================
 
  Table : Std_fastcd_45_061013 
 Sequence Exp_tim1  Med_cnt1  Med_cnt2  Variance  Frc_cnt1  Frc_cnt2  el_adu1  
 -------- --------- --------- --------- --------- --------- --------- ---------
        1      0.55    1717.5    1718.8     824.0      0.14      0.04      2.08
        2      1.09    3423.7    3423.6    1639.1     -0.15     -0.21      2.09
        3      2.17    6867.6    6868.3    3375.6      0.07      0.07      2.03
        4      3.25   10278.2   10282.2    5099.1     -0.12     -0.10      2.02
        5      4.88   15440.1   15440.0    7599.1      0.00      0.01      2.03
        6      6.50   20573.1   20573.6   10278.2     -0.08     -0.06      2.00
        7      8.13   25741.3   25742.4   12915.3      0.02      0.04      1.99
        8     10.84   34313.4   34316.0   17474.7     -0.00      0.02      1.96
        9     13.55   42908.9   42915.5   21248.7      0.03      0.07      2.02
       10     16.25   51521.6   51523.5   25697.0      0.09      0.12      2.00
 -------- --------- --------- --------- --------- --------- --------- ---------
 
      Dynamic range explored: from 3431 to 102898 e-
      Average count rate measured: 3167 ADU/sec.
 
      CONV. FACTOR AND RON
      ====================
 
      C.Fact =   2.00 +/-   0.01 e-/ADU
 
      RON    =   3.69 +/-   0.02 e- RMS
 
 
      SHUTTER ERROR
      =============
 
 Average shutter error derived from fractional count rate = -0.004 sec
 
 
      LINEARITY ERROR
      ===============
 
 Average linearity error after shutter correct. = + 0.13/-0.18 %
 
 These errors represent maximum deviation in % from the average
 count rate after correction for shutter delay