*** MIDAS logfile (05SEPpl1.2) *** Th, 12 Oct 2006   16:51:55   Page 1
 
 
*** MIDAS logfile (vers. 05SEPpl1.2) *** Th, 12 Oct 2006   16:52:08   Page 2
 
     ==========================================================
     SUMMARY STANDARD TEST CCD#45 TAKEN ON 061012 IN fastcd MODE
     ==========================================================
 
      BIAS
      ====
 
      5 biases at start test: average = 297.91 stddev =   1.86 
               FIERA temperature = 273.15 K                   
      There were 0 hot pixels/columns detected
 
 
      TRANSFER FUNCTION AND LINEARITY DATA
      ====================================
 
  Table : Std_fastcd_45_061012 
 Sequence Exp_tim1  Med_cnt1  Med_cnt2  Variance  Frc_cnt1  Frc_cnt2  el_adu1  
 -------- --------- --------- --------- --------- --------- --------- ---------
        1      0.55    1705.4    1704.9     839.9      0.08      0.06      2.03
        2      1.09    3404.5    3401.1    1640.2     -0.14     -0.19      2.08
        3      2.17    6827.1    6824.0    3347.4      0.06      0.05      2.04
        4      3.25   10220.7   10223.4    4949.5     -0.11     -0.08      2.07
        5      4.88   15350.8   15351.8    7492.0      0.01      0.03      2.05
        6      6.50   20450.4   20455.6   10611.9     -0.09     -0.06      1.93
        7      8.13   25593.5   25590.9   12899.8      0.03      0.03      1.98
        8     10.84   34114.7   34113.6   17588.9      0.01      0.01      1.94
        9     13.55   42658.6   42664.4   21757.1      0.04      0.06      1.96
       10     16.25   51220.5   51219.8   24919.1      0.10      0.11      2.06
 -------- --------- --------- --------- --------- --------- --------- ---------
 
      Dynamic range explored: from 3409 to 102395 e-
      Average count rate measured: 3149 ADU/sec.
 
      CONV. FACTOR AND RON
      ====================
 
      C.Fact =   2.00 +/-   0.03 e-/ADU
 
      RON    =   3.72 +/-   0.06 e- RMS
 
 
      SHUTTER ERROR
      =============
 
 Average shutter error derived from fractional count rate = -0.004 sec
 
 
      LINEARITY ERROR
      ===============
 
 Average linearity error after shutter correct. = + 0.10/-0.16 %
 
 These errors represent maximum deviation in % from the average
 count rate after correction for shutter delay