*** MIDAS logfile (05SEPpl1.2) *** We, 04 Oct 2006 14:44:15 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** We, 04 Oct 2006 14:44:29 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 061004 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 298.44 stddev = 1.88 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_061004 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.55 1713.6 1716.9 809.9 0.09 0.04 2.12 2 1.09 3419.1 3419.6 1634.2 -0.16 -0.21 2.09 3 2.17 6856.8 6855.2 3340.7 0.06 0.03 2.05 4 3.25 10270.7 10266.3 5051.6 -0.09 -0.11 2.03 5 4.88 15422.1 15421.2 7717.4 0.02 0.03 2.00 6 6.50 20549.6 20545.3 10510.3 -0.07 -0.06 1.96 7 8.13 25709.0 25708.7 12545.0 0.02 0.05 2.05 8 10.84 34271.1 34272.6 16810.3 0.00 0.03 2.04 9 13.55 42853.4 42859.5 20900.4 0.03 0.07 2.05 10 16.25 51459.6 51458.8 25697.3 0.10 0.13 2.00 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3467 to 104006 e- Average count rate measured: 3163 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.02 +/- 0.02 e-/ADU RON = 3.79 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.004 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.12/-0.19 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay