*** MIDAS logfile (05SEPpl1.2) *** Su, 01 Oct 2006   15:15:44   Page 1
 
 
*** MIDAS logfile (vers. 05SEPpl1.2) *** Su, 01 Oct 2006   15:15:58   Page 2
 
     ==========================================================
     SUMMARY STANDARD TEST CCD#45 TAKEN ON 061001 IN fastcd MODE
     ==========================================================
 
      BIAS
      ====
 
      5 biases at start test: average = 298.02 stddev =   2.43 
               FIERA temperature = 273.15 K                   
      There were 0 hot pixels/columns detected
 
 
      TRANSFER FUNCTION AND LINEARITY DATA
      ====================================
 
  Table : Std_fastcd_45_061001 
 Sequence Exp_tim1  Med_cnt1  Med_cnt2  Variance  Frc_cnt1  Frc_cnt2  el_adu1  
 -------- --------- --------- --------- --------- --------- --------- ---------
        1      0.55    1722.3    1722.0     837.3      0.09      0.07      2.06
        2      1.09    3429.7    3429.9    1655.9     -0.18     -0.16      2.07
        3      2.17    6874.5    6876.6    3384.6      0.04      0.07      2.03
        4      3.25   10296.9   10295.8    5092.6     -0.09     -0.11      2.02
        5      4.88   15459.7   15460.6    7656.0      0.01      0.01      2.02
        6      6.50   20600.3   20598.8   10450.4     -0.07     -0.07      1.97
        7      8.13   25774.3   25776.5   12929.0      0.03      0.03      1.99
        8     10.84   34355.1   34354.6   17187.7      0.01      0.00      2.00
        9     13.55   42968.4   42967.4   21585.8      0.06      0.06      1.99
       10     16.25   51581.3   51576.3   26243.8      0.10      0.09      1.97
 -------- --------- --------- --------- --------- --------- --------- ---------
 
      Dynamic range explored: from 3394 to 101657 e-
      Average count rate measured: 3171 ADU/sec.
 
      CONV. FACTOR AND RON
      ====================
 
      C.Fact =   1.97 +/-   0.01 e-/ADU
 
      RON    =   4.79 +/-   0.02 e- RMS
 
 
      SHUTTER ERROR
      =============
 
 Average shutter error derived from fractional count rate = -0.003 sec
 
 
      LINEARITY ERROR
      ===============
 
 Average linearity error after shutter correct. = + 0.10/-0.17 %
 
 These errors represent maximum deviation in % from the average
 count rate after correction for shutter delay