*** MIDAS logfile (05SEPpl1.2) *** We, 27 Sep 2006 19:14:14 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** We, 27 Sep 2006 19:14:28 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 060927 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 297.91 stddev = 2.46 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_060927 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.55 1712.0 1708.3 830.8 0.03 0.05 2.06 2 1.09 3409.3 3409.3 1621.7 -0.23 -0.16 2.10 3 2.17 6840.7 6837.3 3260.1 0.07 0.07 2.10 4 3.25 10239.4 10239.0 4905.2 -0.11 -0.11 2.09 5 4.88 15380.0 15379.6 7456.0 0.03 0.02 2.06 6 6.50 20492.3 20488.6 10393.6 -0.05 -0.07 1.97 7 8.13 25638.5 25640.9 12909.0 0.04 0.04 1.99 8 10.84 34174.6 34174.3 17130.4 0.02 0.01 1.99 9 13.55 42742.6 42741.4 21248.9 0.08 0.06 2.01 10 16.25 51308.6 51306.5 25857.8 0.12 0.09 1.98 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3388 to 101658 e- Average count rate measured: 3154 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.98 +/- 0.01 e-/ADU RON = 4.88 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.004 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.10/-0.20 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay