*** MIDAS logfile (05SEPpl1.2) *** We, 13 Sep 2006   14:35:13   Page 1
 
 
*** MIDAS logfile (vers. 05SEPpl1.2) *** We, 13 Sep 2006   14:35:28   Page 2
 
     ==========================================================
     SUMMARY STANDARD TEST CCD#45 TAKEN ON 060913 IN fastcd MODE
     ==========================================================
 
      BIAS
      ====
 
      5 biases at start test: average = 298.41 stddev =   1.97 
               FIERA temperature = 273.15 K                   
      There were 0 hot pixels/columns detected
 
 
      TRANSFER FUNCTION AND LINEARITY DATA
      ====================================
 
  Table : Std_fastcd_45_060913 
 Sequence Exp_tim1  Med_cnt1  Med_cnt2  Variance  Frc_cnt1  Frc_cnt2  el_adu1  
 -------- --------- --------- --------- --------- --------- --------- ---------
        1      0.55    1710.4    1709.9     815.4      0.07      0.02      2.10
        2      1.09    3410.2    3412.6    1669.2     -0.22     -0.17      2.04
        3      2.17    6847.0    6847.7    3302.2      0.08      0.08      2.07
        4      3.25   10252.3   10250.9    4988.7     -0.10     -0.11      2.06
        5      4.88   15395.3   15400.1    7685.7      0.01      0.04      2.00
        6      6.50   20514.7   20513.5   10302.5     -0.07     -0.07      1.99
        7      8.13   25670.8   25670.9   12774.5      0.04      0.04      2.01
        8     10.84   34216.8   34210.7   17047.2      0.01     -0.01      2.01
        9     13.55   42807.4   42803.5   21098.7      0.09      0.09      2.03
       10     16.25   51366.8   51365.5   25453.3      0.09      0.09      2.02
 -------- --------- --------- --------- --------- --------- --------- ---------
 
      Dynamic range explored: from 3446 to 103508 e-
      Average count rate measured: 3158 ADU/sec.
 
      CONV. FACTOR AND RON
      ====================
 
      C.Fact =   2.02 +/-   0.01 e-/ADU
 
      RON    =   3.97 +/-   0.01 e- RMS
 
 
      SHUTTER ERROR
      =============
 
 Average shutter error derived from fractional count rate = -0.004 sec
 
 
      LINEARITY ERROR
      ===============
 
 Average linearity error after shutter correct. = + 0.09/-0.20 %
 
 These errors represent maximum deviation in % from the average
 count rate after correction for shutter delay