*** MIDAS logfile (05SEPpl1.2) *** Sa, 26 Aug 2006 19:18:20 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** Sa, 26 Aug 2006 19:18:33 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 060826 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 297.96 stddev = 2.43 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_060826 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.55 1712.9 1712.4 810.6 0.02 0.12 2.11 2 1.09 3416.1 3416.9 1649.7 -0.18 -0.11 2.07 3 2.17 6849.0 6850.9 3296.1 0.05 0.06 2.08 4 3.25 10257.1 10257.5 5009.4 -0.10 -0.11 2.05 5 4.88 15401.5 15404.5 7404.1 0.02 0.00 2.08 6 6.50 20521.0 20521.7 10001.9 -0.07 -0.09 2.05 7 8.13 25676.7 25678.7 12966.3 0.04 0.01 1.98 8 10.84 34231.6 34233.1 17251.3 0.03 -0.01 1.98 9 13.55 42806.2 42810.5 21287.5 0.07 0.04 2.01 10 16.25 51399.9 51402.4 25645.9 0.13 0.10 2.00 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3412 to 102399 e- Average count rate measured: 3159 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.99 +/- 0.01 e-/ADU RON = 4.84 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.004 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.13/-0.15 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay