*** MIDAS logfile (05SEPpl1.2) *** Su, 20 Aug 2006 14:41:04 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** Su, 20 Aug 2006 14:41:18 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 060820 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 297.69 stddev = 2.43 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_060820 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.55 1720.6 1720.9 810.1 0.14 0.14 2.12 2 1.09 3429.4 3428.9 1666.2 -0.14 -0.17 2.06 3 2.17 6878.8 6878.7 3291.3 0.07 0.07 2.09 4 3.25 10296.5 10296.0 5047.1 -0.13 -0.12 2.04 5 4.88 15465.6 15466.7 7697.3 0.01 0.02 2.01 6 6.50 20606.5 20606.6 10320.7 -0.08 -0.08 2.00 7 8.13 25777.8 25782.2 12544.1 0.00 0.02 2.05 8 10.84 34366.2 34363.7 17156.3 -0.01 -0.01 2.00 9 13.55 42988.3 42987.8 21921.7 0.06 0.06 1.96 10 16.25 51598.8 51600.1 25688.1 0.08 0.09 2.01 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3418 to 102478 e- Average count rate measured: 3172 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.99 +/- 0.01 e-/ADU RON = 4.82 +/- 0.04 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.004 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.14/-0.16 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay