*** MIDAS logfile (05SEPpl1.2) *** Th, 10 Aug 2006 15:57:19 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** Th, 10 Aug 2006 15:57:33 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 060810 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 298.81 stddev = 2.47 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_060810 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.64 1997.5 1994.9 971.8 -0.08 -0.05 2.06 2 1.27 4010.9 4010.0 1943.9 0.31 0.35 2.06 3 2.54 7984.1 7984.5 3844.6 -0.19 -0.17 2.08 4 3.80 11988.8 11987.8 5874.7 -0.05 -0.06 2.04 5 5.70 17990.5 17990.9 9049.0 -0.03 -0.04 1.99 6 7.60 23965.7 23965.7 11968.0 -0.13 -0.14 2.00 7 9.50 29981.9 29982.2 15035.1 -0.05 -0.06 1.99 8 12.66 40018.1 40020.0 20762.1 0.06 0.05 1.93 9 15.83 50025.8 50025.3 24698.6 0.06 0.04 2.03 10 18.99 60048.7 60052.6 29499.1 0.09 0.08 2.04 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 4013 to 120725 e- Average count rate measured: 3160 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.01 +/- 0.02 e-/ADU RON = 4.97 +/- 0.06 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.005 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.33/-0.18 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay