*** MIDAS logfile (05SEPpl1.2) *** Th, 20 Jul 2006   15:55:20   Page 1
 
 
*** MIDAS logfile (vers. 05SEPpl1.2) *** Th, 20 Jul 2006   15:55:35   Page 2
 
     ==========================================================
     SUMMARY STANDARD TEST CCD#45 TAKEN ON 060720 IN fastcd MODE
     ==========================================================
 
      BIAS
      ====
 
      5 biases at start test: average = 298.04 stddev =   1.96 
               FIERA temperature = 273.15 K                   
      There were 0 hot pixels/columns detected
 
 
      TRANSFER FUNCTION AND LINEARITY DATA
      ====================================
 
  Table : Std_fastcd_45_060720 
 Sequence Exp_tim1  Med_cnt1  Med_cnt2  Variance  Frc_cnt1  Frc_cnt2  el_adu1  
 -------- --------- --------- --------- --------- --------- --------- ---------
        1      0.77    1601.8    1600.7     723.3      0.09      0.05      2.21
        2      1.54    3189.7    3190.1    1539.2     -0.11     -0.09      2.07
        3      3.08    6376.6    6377.9    3185.1     -0.06     -0.05      2.00
        4      4.62    9561.5    9563.5    4675.4     -0.05     -0.03      2.05
        5      6.93   14325.6   14326.0    6889.2     -0.15     -0.14      2.08
        6      9.23   19119.3   19115.4    9549.7     -0.05     -0.06      2.00
        7     11.54   23910.5   23912.2   11735.5      0.01      0.03      2.04
        8     15.39   31885.2   31885.7   15386.6      0.03      0.03      2.07
        9     19.23   39888.6   39886.7   19605.2      0.12      0.11      2.03
       10     23.08   47883.3   47882.9   24316.3      0.16      0.16      1.97
 -------- --------- --------- --------- --------- --------- --------- ---------
 
      Dynamic range explored: from 3200 to 95679 e-
      Average count rate measured: 2071 ADU/sec.
 
      CONV. FACTOR AND RON
      ====================
 
      C.Fact =   2.00 +/-   0.02 e-/ADU
 
      RON    =   3.93 +/-   0.04 e- RMS
 
 
      SHUTTER ERROR
      =============
 
 Average shutter error derived from fractional count rate = -0.000 sec
 
 
      LINEARITY ERROR
      ===============
 
 Average linearity error after shutter correct. = + 0.16/-0.15 %
 
 These errors represent maximum deviation in % from the average
 count rate after correction for shutter delay