*** MIDAS logfile (05SEPpl1.2) *** Su, 02 Jul 2006 13:39:18 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** Su, 02 Jul 2006 13:39:32 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 060702 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 297.58 stddev = 1.97 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_060702 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1597.4 1597.1 758.9 0.06 0.04 2.10 2 1.54 3185.1 3186.3 1561.1 -0.04 -0.01 2.04 3 3.08 6361.9 6363.4 3078.0 -0.08 -0.08 2.07 4 4.62 9542.3 9544.3 4862.3 -0.04 -0.03 1.96 5 6.93 14296.5 14296.9 7182.9 -0.14 -0.14 1.99 6 9.23 19074.9 19076.8 9566.2 -0.07 -0.06 1.99 7 11.54 23862.4 23860.0 11721.0 0.02 0.01 2.04 8 15.39 31817.5 31817.9 16128.5 0.03 0.03 1.97 9 19.23 39803.2 39800.9 20204.0 0.11 0.10 1.97 10 23.08 47779.5 47785.2 23585.3 0.15 0.16 2.03 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3192 to 95499 e- Average count rate measured: 2067 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.00 +/- 0.02 e-/ADU RON = 3.94 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.000 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.15/-0.14 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay