*** MIDAS logfile (05SEPpl1.2) *** Sa, 13 May 2006 14:04:52 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** Sa, 13 May 2006 14:05:06 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 060513 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 297.92 stddev = 1.94 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_060513 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1634.6 1636.3 766.9 0.03 0.11 2.13 2 1.54 3257.7 3259.0 1591.9 -0.06 -0.06 2.05 3 3.08 6510.0 6510.8 3149.1 -0.08 -0.08 2.07 4 4.62 9764.6 9763.2 4732.2 -0.04 -0.06 2.06 5 6.93 14628.8 14630.2 7185.0 -0.14 -0.15 2.04 6 9.23 19521.3 19521.7 9737.8 -0.05 -0.06 2.00 7 11.54 24417.9 24422.1 11890.5 0.03 0.03 2.05 8 15.39 32555.7 32557.3 16277.1 0.03 0.02 2.00 9 19.23 40741.0 40740.6 20755.0 0.14 0.13 1.96 10 23.08 48889.1 48888.5 24803.8 0.15 0.13 1.97 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3211 to 95985 e- Average count rate measured: 2115 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.96 +/- 0.01 e-/ADU RON = 3.82 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.000 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.14/-0.15 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay