*** MIDAS logfile (05SEPpl1.2) *** Fr, 21 Apr 2006 12:58:20 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** Fr, 21 Apr 2006 12:58:34 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 060421 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 294.96 stddev = 1.95 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_060421 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1649.6 1651.2 788.1 0.07 0.11 2.09 2 1.54 3291.4 3291.1 1574.6 -0.01 -0.03 2.09 3 3.08 6576.0 6576.5 3258.5 -0.08 -0.07 2.02 4 4.62 9864.7 9865.3 4828.8 -0.03 -0.05 2.04 5 6.93 14778.0 14779.5 7230.3 -0.16 -0.16 2.04 6 9.23 19720.8 19723.9 10049.5 -0.07 -0.06 1.96 7 11.54 24667.8 24665.4 12321.0 0.01 -0.00 2.00 8 15.39 32897.1 32895.1 16800.8 0.03 0.02 1.96 9 19.23 41144.4 41147.8 20756.5 0.09 0.09 1.98 10 23.08 49403.7 49401.8 24542.1 0.15 0.15 2.01 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3280 to 98180 e- Average count rate measured: 2137 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.99 +/- 0.01 e-/ADU RON = 3.88 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.001 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.15/-0.16 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay