*** MIDAS logfile (05SEPpl1.2) *** Fr, 07 Apr 2006   13:11:34   Page 1
 
 
*** MIDAS logfile (vers. 05SEPpl1.2) *** Fr, 07 Apr 2006   13:11:48   Page 2
 
     ==========================================================
     SUMMARY STANDARD TEST CCD#45 TAKEN ON 060407 IN fastcd MODE
     ==========================================================
 
      BIAS
      ====
 
      5 biases at start test: average = 295.11 stddev =   1.96 
               FIERA temperature = 273.15 K                   
      There were 0 hot pixels/columns detected
 
 
      TRANSFER FUNCTION AND LINEARITY DATA
      ====================================
 
  Table : Std_fastcd_45_060407 
 Sequence Exp_tim1  Med_cnt1  Med_cnt2  Variance  Frc_cnt1  Frc_cnt2  el_adu1  
 -------- --------- --------- --------- --------- --------- --------- ---------
        1      0.77    1657.1    1655.7    1119.3      0.05      0.12      1.48
        2      1.54    3303.1    3300.7    1595.6     -0.06     -0.06      2.07
        3      3.08    6597.6    6597.8    3212.6     -0.09     -0.08      2.05
        4      4.62    9895.0    9896.1    4702.8     -0.06     -0.06      2.10
        5      6.93   14831.0   14830.8    7197.4     -0.13     -0.14      2.06
        6      9.23   19786.7   19786.0    9915.6     -0.06     -0.07      2.00
        7     11.54   24751.5   24753.1   12139.0      0.03      0.02      2.04
        8     15.39   33003.2   33000.5   16295.1      0.04      0.01      2.03
        9     19.23   41290.6   41293.2   20432.0      0.13      0.12      2.02
       10     23.08   49557.3   49559.0   23875.2      0.15      0.14      2.08
 -------- --------- --------- --------- --------- --------- --------- ---------
 
      Dynamic range explored: from 3407 to 101946 e-
      Average count rate measured: 2144 ADU/sec.
 
      CONV. FACTOR AND RON
      ====================
 
      C.Fact =   2.06 +/-   0.02 e-/ADU
 
      RON    =   4.04 +/-   0.04 e- RMS
 
 
      SHUTTER ERROR
      =============
 
 Average shutter error derived from fractional count rate = -0.001 sec
 
 
      LINEARITY ERROR
      ===============
 
 Average linearity error after shutter correct. = + 0.14/-0.13 %
 
 These errors represent maximum deviation in % from the average
 count rate after correction for shutter delay