*** MIDAS logfile (05SEPpl1.2) *** We, 29 Mar 2006 14:15:10 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** We, 29 Mar 2006 14:15:24 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 060329 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 294.61 stddev = 1.95 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_060329 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1656.8 1657.7 792.5 0.08 0.07 2.09 2 1.54 3305.3 3306.7 1544.1 -0.04 -0.03 2.14 3 3.08 6607.0 6606.2 3106.0 -0.07 -0.07 2.13 4 4.62 9909.1 9906.9 4816.4 -0.04 -0.05 2.06 5 6.93 14847.8 14845.5 7333.2 -0.13 -0.15 2.02 6 9.23 19807.8 19806.6 9792.1 -0.07 -0.07 2.02 7 11.54 24777.3 24777.5 12598.5 0.01 0.02 1.97 8 15.39 33039.1 33041.0 16513.0 0.02 0.03 2.00 9 19.23 41331.0 41332.2 20796.9 0.10 0.11 1.99 10 23.08 49614.6 49613.4 24926.4 0.14 0.14 1.99 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3276 to 98077 e- Average count rate measured: 2147 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.98 +/- 0.01 e-/ADU RON = 3.85 +/- 0.02 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.001 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.14/-0.14 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay