*** MIDAS logfile (05SEPpl1.2) *** Fr, 17 Mar 2006   16:58:13   Page 1
 
 
*** MIDAS logfile (vers. 05SEPpl1.2) *** Fr, 17 Mar 2006   16:58:27   Page 2
 
     ==========================================================
     SUMMARY STANDARD TEST CCD#45 TAKEN ON 060317 IN fastcd MODE
     ==========================================================
 
      BIAS
      ====
 
      5 biases at start test: average = 294.89 stddev =   1.98 
               FIERA temperature = 273.15 K                   
      There were 0 hot pixels/columns detected
 
 
      TRANSFER FUNCTION AND LINEARITY DATA
      ====================================
 
  Table : Std_fastcd_45_060317 
 Sequence Exp_tim1  Med_cnt1  Med_cnt2  Variance  Frc_cnt1  Frc_cnt2  el_adu1  
 -------- --------- --------- --------- --------- --------- --------- ---------
        1      0.77    1684.8    1684.2     804.1      0.05      0.02      2.10
        2      1.54    3358.1    3358.3    1565.0     -0.08     -0.07      2.15
        3      3.08    6712.0    6713.0    3180.7     -0.06     -0.06      2.11
        4      4.62   10068.6   10067.5    5109.0     -0.02     -0.02      1.97
        5      6.93   15081.9   15079.6    7431.0     -0.14     -0.14      2.03
        6      9.23   20123.4   20122.4   10168.2     -0.05     -0.06      1.98
        7     11.54   25168.5   25171.5   12264.1      0.02      0.03      2.05
        8     15.39   33559.2   33565.0   17269.7      0.02      0.04      1.94
        9     19.23   41992.6   41991.5   21164.2      0.13      0.13      1.98
       10     23.08   50395.0   50393.1   24965.1      0.14      0.14      2.02
 -------- --------- --------- --------- --------- --------- --------- ---------
 
      Dynamic range explored: from 3352 to 100273 e-
      Average count rate measured: 2180 ADU/sec.
 
      CONV. FACTOR AND RON
      ====================
 
      C.Fact =   1.99 +/-   0.02 e-/ADU
 
      RON    =   3.94 +/-   0.04 e- RMS
 
 
      SHUTTER ERROR
      =============
 
 Average shutter error derived from fractional count rate = -0.000 sec
 
 
      LINEARITY ERROR
      ===============
 
 Average linearity error after shutter correct. = + 0.14/-0.14 %
 
 These errors represent maximum deviation in % from the average
 count rate after correction for shutter delay