*** MIDAS logfile (05SEPpl1.2) *** Fr, 03 Mar 2006 15:41:17 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** Fr, 03 Mar 2006 15:41:31 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 060303 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 298.04 stddev = 1.93 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_060303 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1688.4 1689.3 801.3 0.07 0.12 2.11 2 1.54 3362.8 3362.5 1594.6 -0.13 -0.12 2.11 3 3.08 6727.5 6726.6 3196.7 -0.02 -0.02 2.10 4 4.62 10079.7 10078.6 5013.7 -0.08 -0.09 2.01 5 6.93 15111.5 15108.8 7244.3 -0.12 -0.13 2.09 6 9.23 20157.1 20155.3 9829.5 -0.07 -0.07 2.05 7 11.54 25224.8 25222.0 12776.7 0.06 0.05 1.97 8 15.39 33609.7 33603.2 17005.3 -0.01 -0.02 1.98 9 19.23 42107.8 42100.1 20761.6 0.22 0.21 2.03 10 23.08 50449.4 50444.6 25034.1 0.07 0.07 2.02 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3382 to 101017 e- Average count rate measured: 2184 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.00 +/- 0.02 e-/ADU RON = 3.87 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.000 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.22/-0.13 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay