*** MIDAS logfile (05SEPpl1.2) *** Sa, 25 Feb 2006 12:18:20 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** Sa, 25 Feb 2006 12:18:34 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 060225 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 298.07 stddev = 1.94 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_060225 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1697.0 1696.5 795.0 0.03 0.00 2.13 2 1.54 3384.1 3385.5 1599.2 -0.06 -0.04 2.12 3 3.08 6762.5 6763.8 3220.4 -0.06 -0.05 2.10 4 4.62 10143.4 10141.2 4934.1 -0.03 -0.05 2.06 5 6.93 15194.7 15193.2 7341.6 -0.14 -0.14 2.07 6 9.23 20274.1 20272.8 10086.8 -0.06 -0.06 2.01 7 11.54 25361.8 25361.2 12714.7 0.03 0.03 1.99 8 15.39 33812.0 33814.2 17203.6 0.02 0.03 1.97 9 19.23 42313.0 42313.2 21274.6 0.14 0.14 1.99 10 23.08 50768.6 50770.7 25188.1 0.13 0.14 2.02 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3371 to 100864 e- Average count rate measured: 2197 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.99 +/- 0.01 e-/ADU RON = 3.86 +/- 0.02 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.000 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.14/-0.14 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay