*** MIDAS logfile (05SEPpl1.2) *** Fr, 17 Feb 2006 15:26:16 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** Fr, 17 Feb 2006 15:26:29 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 060217 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 298.03 stddev = 1.95 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_060217 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1691.8 1691.2 811.0 0.02 -0.00 2.09 2 1.54 3376.8 3376.3 1593.1 -0.03 -0.05 2.12 3 3.08 6748.0 6748.3 3287.3 -0.07 -0.06 2.05 4 4.62 10121.9 10123.2 5077.2 -0.04 -0.02 1.99 5 6.93 15167.2 15164.9 7497.2 -0.14 -0.14 2.02 6 9.23 20233.2 20237.6 9957.1 -0.07 -0.05 2.03 7 11.54 25311.7 25310.5 12461.5 0.02 0.01 2.03 8 15.39 33759.3 33756.3 17140.8 0.05 0.04 1.97 9 19.23 42218.5 42224.9 21008.4 0.10 0.11 2.01 10 23.08 50694.9 50695.3 25063.0 0.16 0.17 2.02 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3394 to 101720 e- Average count rate measured: 2193 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.01 +/- 0.01 e-/ADU RON = 3.92 +/- 0.02 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.001 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.16/-0.14 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay