*** MIDAS logfile (05SEPpl1.2) *** Sa, 11 Feb 2006 13:20:20 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** Sa, 11 Feb 2006 13:20:34 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 060211 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 297.94 stddev = 1.97 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_060211 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1710.0 1711.7 797.1 0.05 0.10 2.15 2 1.54 3410.2 3409.9 1649.3 -0.05 -0.06 2.07 3 3.08 6813.2 6812.7 3296.9 -0.08 -0.10 2.07 4 4.62 10222.0 10221.1 4954.2 -0.02 -0.04 2.06 5 6.93 15310.6 15315.3 7483.2 -0.15 -0.13 2.05 6 9.23 20432.0 20429.9 9958.6 -0.05 -0.07 2.05 7 11.54 25556.3 25554.7 12852.6 0.02 0.02 1.99 8 15.39 34078.7 34078.7 17365.6 0.03 0.03 1.96 9 19.23 42627.2 42627.5 20906.6 0.11 0.10 2.04 10 23.08 51170.9 51171.1 25771.4 0.15 0.14 1.99 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3401 to 101718 e- Average count rate measured: 2214 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.99 +/- 0.02 e-/ADU RON = 3.91 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.000 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.14/-0.14 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay