*** MIDAS logfile (05SEPpl1.2) *** Su, 05 Feb 2006   18:39:40   Page 1
 
 
*** MIDAS logfile (vers. 05SEPpl1.2) *** Su, 05 Feb 2006   18:39:54   Page 2
 
     ==========================================================
     SUMMARY STANDARD TEST CCD#45 TAKEN ON 060205 IN fastcd MODE
     ==========================================================
 
      BIAS
      ====
 
      5 biases at start test: average = 297.91 stddev =   1.94 
               FIERA temperature = 273.15 K                   
      There were 0 hot pixels/columns detected
 
 
      TRANSFER FUNCTION AND LINEARITY DATA
      ====================================
 
  Table : Std_fastcd_45_060205 
 Sequence Exp_tim1  Med_cnt1  Med_cnt2  Variance  Frc_cnt1  Frc_cnt2  el_adu1  
 -------- --------- --------- --------- --------- --------- --------- ---------
        1      0.77    1701.5    1701.8     822.2      0.06      0.05      2.07
        2      1.54    3393.5    3393.0    1626.2     -0.04     -0.05      2.09
        3      3.08    6782.1    6783.1    3235.8     -0.08     -0.07      2.10
        4      4.62   10172.8   10175.7    4886.4     -0.04     -0.02      2.08
        5      6.93   15245.4   15244.1    7508.3     -0.13     -0.14      2.03
        6      9.23   20343.6   20340.2    9958.6     -0.05     -0.06      2.04
        7     11.54   25437.2   25441.3   12852.8      0.00      0.01      1.98
        8     15.39   33930.8   33932.5   16819.2      0.04      0.04      2.02
        9     19.23   42435.4   42438.4   20996.0      0.10      0.10      2.02
       10     23.08   50949.3   50952.0   25347.2      0.15      0.15      2.01
 -------- --------- --------- --------- --------- --------- --------- ---------
 
      Dynamic range explored: from 3411 to 102131 e-
      Average count rate measured: 2204 ADU/sec.
 
      CONV. FACTOR AND RON
      ====================
 
      C.Fact =   2.00 +/-   0.01 e-/ADU
 
      RON    =   3.88 +/-   0.02 e- RMS
 
 
      SHUTTER ERROR
      =============
 
 Average shutter error derived from fractional count rate = -0.001 sec
 
 
      LINEARITY ERROR
      ===============
 
 Average linearity error after shutter correct. = + 0.15/-0.14 %
 
 These errors represent maximum deviation in % from the average
 count rate after correction for shutter delay