*** MIDAS logfile (05SEPpl1.2) *** Fr, 27 Jan 2006 12:29:33 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** Fr, 27 Jan 2006 12:29:47 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 060127 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 297.26 stddev = 1.95 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_060127 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1704.7 1703.9 821.8 0.04 0.08 2.07 2 1.54 3399.5 3400.2 1635.8 -0.04 -0.01 2.08 3 3.08 6790.8 6792.6 3179.3 -0.09 -0.07 2.14 4 4.62 10186.7 10185.6 4938.2 -0.04 -0.05 2.06 5 6.93 15261.5 15262.0 7666.7 -0.14 -0.15 1.99 6 9.23 20362.7 20367.1 10145.5 -0.07 -0.06 2.01 7 11.54 25473.6 25472.1 12827.9 0.02 0.01 1.99 8 15.39 33967.9 33970.5 17126.3 0.04 0.02 1.98 9 19.23 42493.7 42493.9 21786.1 0.12 0.10 1.95 10 23.08 51010.3 51007.4 25665.5 0.16 0.13 1.99 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3344 to 100088 e- Average count rate measured: 2207 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.96 +/- 0.01 e-/ADU RON = 3.83 +/- 0.02 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.001 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.15/-0.15 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay