*** MIDAS logfile (05SEPpl1.2) *** Sa, 21 Jan 2006 14:09:17 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** Sa, 21 Jan 2006 14:09:31 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 060121 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 298.95 stddev = 1.99 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_060121 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1708.8 1708.8 836.9 0.00 0.08 2.04 2 1.54 3410.3 3411.6 1642.2 -0.02 0.02 2.08 3 3.08 6810.0 6810.8 3314.9 -0.11 -0.10 2.05 4 4.62 10220.2 10221.8 5024.2 -0.02 -0.02 2.03 5 6.93 15309.6 15311.3 7625.4 -0.14 -0.15 2.01 6 9.23 20426.7 20429.1 10385.5 -0.06 -0.07 1.97 7 11.54 25549.3 25549.6 12573.0 0.02 -0.01 2.03 8 15.39 34075.6 34077.4 16773.0 0.05 0.02 2.03 9 19.23 42617.7 42618.7 21089.3 0.11 0.08 2.02 10 23.08 51173.3 51173.8 24958.1 0.17 0.15 2.05 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3482 to 104287 e- Average count rate measured: 2214 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.04 +/- 0.01 e-/ADU RON = 4.07 +/- 0.02 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.001 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.16/-0.14 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay