*** MIDAS logfile (05SEPpl1.2) *** We, 11 Jan 2006 15:03:17 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** We, 11 Jan 2006 15:03:31 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 060111 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 298.53 stddev = 1.96 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_060111 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1693.4 1693.5 809.6 -0.17 -0.10 2.09 2 1.54 3406.6 3407.9 1597.5 0.34 0.34 2.13 3 3.08 6784.5 6783.8 3155.6 -0.15 -0.19 2.15 4 4.62 10201.2 10205.1 4915.0 0.10 0.08 2.08 5 6.93 15270.3 15273.1 7502.9 -0.12 -0.16 2.04 6 9.23 20388.9 20393.7 10167.1 0.01 -0.03 2.01 7 11.54 25456.4 25475.4 12891.1 -0.09 -0.09 1.97 8 15.39 34030.1 34042.9 17382.9 0.15 0.12 1.96 9 19.23 42296.0 42394.3 20505.8 -0.41 -0.25 2.06 10 23.08 51135.6 51143.5 25930.6 0.33 0.28 1.97 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3359 to 101426 e- Average count rate measured: 2209 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.98 +/- 0.02 e-/ADU RON = 3.89 +/- 0.05 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.005 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.34/-0.33 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay