*** MIDAS logfile (05SEPpl1.2) *** Th, 29 Dec 2005   13:53:18   Page 1
 
 
*** MIDAS logfile (vers. 05SEPpl1.2) *** Th, 29 Dec 2005   13:53:32   Page 2
 
     ==========================================================
     SUMMARY STANDARD TEST CCD#45 TAKEN ON 051229 IN fastcd MODE
     ==========================================================
 
      BIAS
      ====
 
      5 biases at start test: average = 299.75 stddev =   1.96 
               FIERA temperature = 273.15 K                   
      There were 0 hot pixels/columns detected
 
 
      TRANSFER FUNCTION AND LINEARITY DATA
      ====================================
 
  Table : Std_fastcd_45_051229 
 Sequence Exp_tim1  Med_cnt1  Med_cnt2  Variance  Frc_cnt1  Frc_cnt2  el_adu1  
 -------- --------- --------- --------- --------- --------- --------- ---------
        1      0.77    1716.0    1715.5     829.3      0.04      0.10      2.07
        2      1.54    3421.7    3421.5    1658.4     -0.06     -0.03      2.06
        3      3.08    6837.3    6837.8    3339.0     -0.08     -0.07      2.05
        4      4.62   10255.5   10257.0    5094.3     -0.04     -0.04      2.01
        5      6.93   15365.8   15366.4    7585.6     -0.14     -0.15      2.03
        6      9.23   20504.2   20504.7   10131.0     -0.05     -0.06      2.02
        7     11.54   25646.8   25646.5   12934.5      0.02      0.01      1.98
        8     15.39   34199.3   34201.2   17020.3      0.04      0.02      2.01
        9     19.23   42784.7   42781.5   21146.9      0.12      0.10      2.02
       10     23.08   51356.5   51355.9   25621.7      0.16      0.13      2.00
 -------- --------- --------- --------- --------- --------- --------- ---------
 
      Dynamic range explored: from 3442 to 103016 e-
      Average count rate measured: 2222 ADU/sec.
 
      CONV. FACTOR AND RON
      ====================
 
      C.Fact =   2.01 +/-   0.01 e-/ADU
 
      RON    =   3.94 +/-   0.01 e- RMS
 
 
      SHUTTER ERROR
      =============
 
 Average shutter error derived from fractional count rate = -0.001 sec
 
 
      LINEARITY ERROR
      ===============
 
 Average linearity error after shutter correct. = + 0.14/-0.14 %
 
 These errors represent maximum deviation in % from the average
 count rate after correction for shutter delay