*** MIDAS logfile (05SEPpl1.2) *** Mo, 26 Dec 2005 14:01:05 Page 1 *** MIDAS logfile (vers. 05SEPpl1.2) *** Mo, 26 Dec 2005 14:01:19 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 051226 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 299.07 stddev = 1.88 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_051226 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1696.9 1697.0 789.6 0.06 0.06 2.15 2 1.54 3386.5 3388.1 1647.0 -0.01 0.01 2.06 3 3.08 6764.5 6766.8 3279.2 -0.09 -0.08 2.06 4 4.62 10150.8 10150.6 4926.5 -0.03 -0.04 2.06 5 6.93 15204.3 15208.5 7469.1 -0.15 -0.14 2.04 6 9.23 20288.8 20290.6 10039.5 -0.07 -0.07 2.02 7 11.54 25376.5 25374.3 12484.2 -0.00 -0.01 2.03 8 15.39 33846.4 33844.4 16769.5 0.03 0.02 2.02 9 19.23 42328.6 42329.9 21083.5 0.08 0.08 2.01 10 23.08 50832.6 50833.6 24966.3 0.16 0.16 2.04 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3426 to 102637 e- Average count rate measured: 2199 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.02 +/- 0.01 e-/ADU RON = 3.80 +/- 0.01 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.001 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.16/-0.15 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay