*** MIDAS logfile (03SEPpl1.2) *** Fr, 09 Dec 2005   17:54:48   Page 1
 
 
*** MIDAS logfile (vers. 03SEPpl1.2) *** Fr, 09 Dec 2005   17:55:02   Page 2
 
     ==========================================================
     SUMMARY STANDARD TEST CCD#45 TAKEN ON 051209 IN fastcd MODE
     ==========================================================
 
      BIAS
      ====
 
      5 biases at start test: average = 298.92 stddev =   1.89 
               FIERA temperature = 273.15 K                   
      There were 0 hot pixels/columns detected
 
 
      TRANSFER FUNCTION AND LINEARITY DATA
      ====================================
 
  Table : Std_fastcd_45_051209 
 Sequence Exp_tim1  Med_cnt1  Med_cnt2  Variance  Frc_cnt1  Frc_cnt2  el_adu1  
 -------- --------- --------- --------- --------- --------- --------- ---------
        1      0.77    1689.3    1689.4     816.6      0.06      0.07      2.07
        2      1.54    3373.1    3370.9    1581.3      0.02     -0.01      2.13
        3      3.08    6737.0    6733.1    3202.7     -0.06     -0.09      2.10
        4      4.62   10101.7   10100.6    4856.9     -0.05     -0.05      2.08
        5      6.93   15137.0   15138.2    7425.7     -0.15     -0.13      2.04
        6      9.23   20196.0   20195.1    9960.5     -0.07     -0.07      2.03
        7     11.54   25257.5   25261.3   12822.7     -0.01      0.01      1.97
        8     15.39   33686.3   33688.7   16808.8      0.01      0.03      2.00
        9     19.23   42136.0   42133.6   21009.1      0.09      0.09      2.01
       10     23.08   50593.1   50593.0   25186.9      0.15      0.16      2.01
 -------- --------- --------- --------- --------- --------- --------- ---------
 
      Dynamic range explored: from 3369 to 100899 e-
      Average count rate measured: 2189 ADU/sec.
 
      CONV. FACTOR AND RON
      ====================
 
      C.Fact =   1.99 +/-   0.01 e-/ADU
 
      RON    =   3.77 +/-   0.02 e- RMS
 
 
      SHUTTER ERROR
      =============
 
 Average shutter error derived from fractional count rate = -0.001 sec
 
 
      LINEARITY ERROR
      ===============
 
 Average linearity error after shutter correct. = + 0.15/-0.14 %
 
 These errors represent maximum deviation in % from the average
 count rate after correction for shutter delay