*** MIDAS logfile (03SEPpl1.2) *** Fr, 04 Nov 2005   14:06:49   Page 1
 
 
*** MIDAS logfile (vers. 03SEPpl1.2) *** Fr, 04 Nov 2005   14:07:05   Page 2
 
     ==========================================================
     SUMMARY STANDARD TEST CCD#45 TAKEN ON 051104 IN fastcd MODE
     ==========================================================
 
      BIAS
      ====
 
      5 biases at start test: average = 299.29 stddev =   1.92 
               FIERA temperature = 273.15 K                   
      There were 0 hot pixels/columns detected
 
 
      TRANSFER FUNCTION AND LINEARITY DATA
      ====================================
 
  Table : Std_fastcd_45_051104 
 Sequence Exp_tim1  Med_cnt1  Med_cnt2  Variance  Frc_cnt1  Frc_cnt2  el_adu1  
 -------- --------- --------- --------- --------- --------- --------- ---------
        1      0.77    1694.0    1692.1     794.2      0.11      0.05      2.13
        2      1.54    3371.8    3373.6    1628.9     -0.14     -0.09      2.07
        3      3.08    6744.8    6744.2    3204.7     -0.05     -0.04      2.10
        4      4.62   10111.8   10111.7    5027.2     -0.05     -0.04      2.01
        5      6.93   15151.1   15149.7    7374.5     -0.14     -0.13      2.05
        6      9.23   20216.3   20211.3   10109.2     -0.06     -0.07      2.00
        7     11.54   25289.2   25288.4   12349.8      0.03      0.04      2.05
        8     15.39   33711.1   33710.2   16842.4      0.01      0.02      2.00
        9     19.23   42201.1   42194.3   21722.2      0.16      0.16      1.94
       10     23.08   50618.8   50610.7   25501.4      0.12      0.12      1.98
 -------- --------- --------- --------- --------- --------- --------- ---------
 
      Dynamic range explored: from 3325 to 99400 e-
      Average count rate measured: 2190 ADU/sec.
 
      CONV. FACTOR AND RON
      ====================
 
      C.Fact =   1.96 +/-   0.02 e-/ADU
 
      RON    =   3.78 +/-   0.03 e- RMS
 
 
      SHUTTER ERROR
      =============
 
 Average shutter error derived from fractional count rate = -0.000 sec
 
 
      LINEARITY ERROR
      ===============
 
 Average linearity error after shutter correct. = + 0.16/-0.14 %
 
 These errors represent maximum deviation in % from the average
 count rate after correction for shutter delay