*** MIDAS logfile (03SEPpl1.2) *** Sa, 29 Oct 2005 15:55:16 Page 1 *** MIDAS logfile (vers. 03SEPpl1.2) *** Sa, 29 Oct 2005 15:55:33 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 051029 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 298.82 stddev = 1.88 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_051029 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1699.3 1701.5 814.0 0.10 0.06 2.09 2 1.54 3389.6 3388.6 1641.3 -0.02 -0.09 2.07 3 3.08 6772.3 6772.0 3243.7 -0.07 -0.09 2.09 4 4.62 10155.4 10157.4 4885.5 -0.07 -0.05 2.08 5 6.93 15218.6 15221.6 7727.0 -0.16 -0.13 1.97 6 9.23 20309.4 20310.5 10458.9 -0.07 -0.05 1.94 7 11.54 25403.6 25404.2 13016.9 0.01 0.03 1.95 8 15.39 33873.7 33875.5 17578.6 0.02 0.04 1.93 9 19.23 42382.6 42382.4 21219.2 0.12 0.13 2.00 10 23.08 50869.3 50868.1 25172.4 0.14 0.16 2.02 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3382 to 101165 e- Average count rate measured: 2201 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.99 +/- 0.02 e-/ADU RON = 3.75 +/- 0.04 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.001 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.15/-0.14 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay