*** MIDAS logfile (03SEPpl1.2) *** We, 12 Oct 2005 16:28:09 Page 1 *** MIDAS logfile (vers. 03SEPpl1.2) *** We, 12 Oct 2005 16:28:25 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 051012 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 298.43 stddev = 1.89 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_051012 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1688.9 1689.7 804.8 0.05 0.08 2.10 2 1.54 3370.2 3369.6 1617.8 -0.05 -0.07 2.08 3 3.08 6736.8 6736.1 3239.2 -0.06 -0.07 2.08 4 4.62 10103.9 10103.7 5043.3 -0.05 -0.05 2.00 5 6.93 15139.1 15139.7 7403.3 -0.14 -0.14 2.04 6 9.23 20201.7 20198.9 10107.3 -0.06 -0.07 2.00 7 11.54 25270.8 25269.6 12538.9 0.03 0.02 2.02 8 15.39 33688.9 33693.1 16320.7 0.01 0.02 2.06 9 19.23 42159.9 42162.0 20949.6 0.13 0.14 2.01 10 23.08 50593.8 50593.9 25164.2 0.14 0.14 2.01 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3403 to 101912 e- Average count rate measured: 2189 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.01 +/- 0.01 e-/ADU RON = 3.82 +/- 0.02 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.001 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.14/-0.14 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay