*** MIDAS logfile (03SEPpl1.2) *** Sa, 08 Oct 2005 11:31:00 Page 1 *** MIDAS logfile (vers. 03SEPpl1.2) *** Sa, 08 Oct 2005 11:31:16 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 051008 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 298.78 stddev = 1.88 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_051008 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1704.4 1705.5 841.3 0.09 0.10 2.03 2 1.54 3396.3 3394.3 1623.4 -0.09 -0.13 2.09 3 3.08 6788.7 6790.6 3187.0 -0.06 -0.03 2.13 4 4.62 10177.5 10177.0 5162.8 -0.07 -0.06 1.97 5 6.93 15255.7 15251.9 7659.4 -0.13 -0.14 1.99 6 9.23 20350.2 20347.8 10242.6 -0.07 -0.07 1.99 7 11.54 25464.8 25462.1 12876.6 0.05 0.05 1.98 8 15.39 33937.8 33932.7 16581.0 0.01 0.00 2.05 9 19.23 42489.3 42487.2 21292.7 0.17 0.18 2.00 10 23.08 50948.9 50949.1 25184.2 0.10 0.11 2.02 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3433 to 102576 e- Average count rate measured: 2205 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.01 +/- 0.01 e-/ADU RON = 3.79 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.000 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.17/-0.13 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay