*** MIDAS logfile (03SEPpl1.2) *** We, 28 Sep 2005 16:50:37 Page 1 *** MIDAS logfile (vers. 03SEPpl1.2) *** We, 28 Sep 2005 16:50:53 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 050928 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 299.54 stddev = 1.91 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_050928 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1689.2 1689.2 842.1 0.06 0.07 2.01 2 1.54 3368.9 3369.8 1624.6 -0.07 -0.06 2.07 3 3.08 6734.7 6734.8 3267.3 -0.07 -0.06 2.06 4 4.62 10100.2 10097.6 4831.1 -0.05 -0.07 2.09 5 6.93 15135.6 15135.2 7480.1 -0.14 -0.14 2.02 6 9.23 20197.2 20192.8 10211.7 -0.05 -0.07 1.98 7 11.54 25265.2 25259.8 12416.8 0.03 0.02 2.03 8 15.39 33679.0 33679.0 16622.3 0.01 0.02 2.03 9 19.23 42151.2 42152.9 21008.2 0.14 0.15 2.01 10 23.08 50575.8 50575.9 25744.1 0.13 0.14 1.96 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3342 to 100074 e- Average count rate measured: 2188 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.98 +/- 0.01 e-/ADU RON = 3.77 +/- 0.03 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.001 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.14/-0.14 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay