*** MIDAS logfile (03SEPpl1.2) *** Fr, 16 Sep 2005 17:33:41 Page 1 *** MIDAS logfile (vers. 03SEPpl1.2) *** Fr, 16 Sep 2005 17:33:57 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 050916 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 299.08 stddev = 1.89 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_050916 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1713.1 1713.6 817.0 0.01 0.02 2.10 2 1.54 3417.3 3418.8 1623.3 -0.05 -0.05 2.11 3 3.08 6828.5 6829.5 3296.3 -0.08 -0.07 2.07 4 4.62 10243.0 10242.5 5028.4 -0.03 -0.04 2.04 5 6.93 15344.8 15343.3 7566.7 -0.14 -0.14 2.03 6 9.23 20474.3 20472.6 10388.3 -0.05 -0.06 1.97 7 11.54 25608.9 25608.7 12773.5 0.02 0.02 2.00 8 15.39 34153.9 34151.5 17228.2 0.04 0.04 1.98 9 19.23 42724.2 42724.9 21488.1 0.13 0.13 1.99 10 23.08 51287.5 51288.8 25872.6 0.17 0.17 1.98 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3383 to 101263 e- Average count rate measured: 2218 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.97 +/- 0.01 e-/ADU RON = 3.74 +/- 0.01 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.000 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.17/-0.14 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay