*** MIDAS logfile (03SEPpl1.2) *** We, 07 Sep 2005 12:59:20 Page 1 *** MIDAS logfile (vers. 03SEPpl1.2) *** We, 07 Sep 2005 12:59:36 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 050907 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 298.97 stddev = 1.89 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_050907 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1709.4 1709.4 988.1 0.05 0.06 1.73 2 1.54 3412.2 3414.1 1656.3 0.00 0.03 2.06 3 3.08 6816.9 6815.5 3203.1 -0.07 -0.09 2.13 4 4.62 10224.1 10223.3 4965.3 -0.04 -0.06 2.06 5 6.93 15319.3 15317.7 7776.3 -0.15 -0.16 1.97 6 9.23 20441.5 20442.5 10175.4 -0.06 -0.07 2.01 7 11.54 25564.8 25569.7 12831.1 -0.00 0.01 1.99 8 15.39 34100.9 34102.3 17473.3 0.04 0.03 1.95 9 19.23 42648.1 42651.9 21537.9 0.09 0.10 1.98 10 23.08 51204.1 51208.8 25073.2 0.15 0.15 2.04 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3428 to 102688 e- Average count rate measured: 2215 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.01 +/- 0.02 e-/ADU RON = 3.79 +/- 0.04 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.001 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.15/-0.15 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay