*** MIDAS logfile (03SEPpl1.2) *** Th, 01 Sep 2005 14:52:18 Page 1 *** MIDAS logfile (vers. 03SEPpl1.2) *** Th, 01 Sep 2005 14:52:34 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 050901 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 299.81 stddev = 1.91 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_050901 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1700.6 1700.1 847.0 0.09 0.06 2.01 2 1.54 3392.0 3392.5 1657.9 -0.06 -0.05 2.05 3 3.08 6779.7 6780.9 3311.2 -0.08 -0.07 2.05 4 4.62 10171.8 10168.9 4901.4 -0.03 -0.05 2.08 5 6.93 15239.4 15236.9 7598.4 -0.14 -0.15 2.01 6 9.23 20333.0 20335.5 10201.4 -0.07 -0.05 1.99 7 11.54 25434.1 25433.4 12588.2 0.01 0.02 2.02 8 15.39 33915.6 33916.1 16900.8 0.03 0.03 2.01 9 19.23 42429.9 42430.0 21257.9 0.11 0.12 2.00 10 23.08 50932.5 50932.7 25360.4 0.15 0.15 2.01 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3400 to 101833 e- Average count rate measured: 2204 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 2.00 +/- 0.01 e-/ADU RON = 3.81 +/- 0.01 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.001 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.15/-0.15 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay