*** MIDAS logfile (03SEPpl1.2) *** Su, 21 Aug 2005 21:07:21 Page 1 *** MIDAS logfile (vers. 03SEPpl1.2) *** Su, 21 Aug 2005 21:07:36 Page 2 ========================================================== SUMMARY STANDARD TEST CCD#45 TAKEN ON 050821 IN fastcd MODE ========================================================== BIAS ==== 5 biases at start test: average = 298.59 stddev = 1.89 FIERA temperature = 273.15 K There were 0 hot pixels/columns detected TRANSFER FUNCTION AND LINEARITY DATA ==================================== Table : Std_fastcd_45_050821 Sequence Exp_tim1 Med_cnt1 Med_cnt2 Variance Frc_cnt1 Frc_cnt2 el_adu1 -------- --------- --------- --------- --------- --------- --------- --------- 1 0.77 1714.5 1713.8 832.8 0.03 -0.01 2.06 2 1.54 3421.0 3420.3 1656.1 -0.03 -0.04 2.07 3 3.08 6833.3 6832.3 3329.3 -0.06 -0.05 2.05 4 4.62 10248.5 10247.5 4995.0 -0.03 -0.03 2.05 5 6.93 15352.4 15351.3 7463.0 -0.14 -0.14 2.06 6 9.23 20482.5 20482.0 10331.3 -0.07 -0.06 1.98 7 11.54 25622.8 25619.4 12973.0 0.02 0.01 1.98 8 15.39 34166.2 34165.3 17090.0 0.03 0.03 2.00 9 19.23 42738.1 42739.3 21375.8 0.10 0.12 2.00 10 23.08 51307.0 51308.5 25705.3 0.15 0.16 2.00 -------- --------- --------- --------- --------- --------- --------- --------- Dynamic range explored: from 3408 to 102009 e- Average count rate measured: 2220 ADU/sec. CONV. FACTOR AND RON ==================== C.Fact = 1.99 +/- 0.01 e-/ADU RON = 3.77 +/- 0.01 e- RMS SHUTTER ERROR ============= Average shutter error derived from fractional count rate = -0.000 sec LINEARITY ERROR =============== Average linearity error after shutter correct. = + 0.16/-0.14 % These errors represent maximum deviation in % from the average count rate after correction for shutter delay